Footing pour + steel
Estimate the cost of foundation footings, including excavation, formwork, concrete pour, and steel reinforcement for building foundations.
Residential footings are typically 3–4 feet deep to reach stable soil. Check with a geotechnical engineer or local building department.
If soil is poor or wet, you may need deeper footings or concrete piles. Adjust this calculator accordingly and consult an engineer.
Multiply length × width × depth (in feet), divide by 27 for cubic yards. Then multiply cubic yards by density (typically 120–130 lbs/cu ft).
Foundation
TOTAL
J$0.00
Run the Excavation calculator first and its total running feet can be pulled in here automatically.
Labour to cast the footing — running feet × this rate, shown as a separate labour line
Depth presets
The average strip-footing casting is 12" deep × 18" wide — adjust to your design.
Matting type
Main bar size
Link offset (o.c.)
Link bar size
Bent links charged by the dozen — footing links, counted as labour
Wall bar size
Spacing along the run, in inches. The steel to order is in the results below.
Cut length of each bar.
JIC default
Enter at least one casting run (or pull it from Excavation) to see results.