🪣

Render

Plastering

render plastering calculator Jamaica

Estimate the cost of wall rendering (plastering), including cement, sand, labour, and finishing coats for exterior and interior surfaces.

  1. 1Enter wall area in square feet
  2. 2Select render type (cement, lime, synthetic)
  3. 3Specify number of coats (typically 2–3)
  4. 4Add surface preparation and finishing labor

Frequently Asked Questions

How thick should render coats be?

Base coats are typically 5/8 inch; finish coat 1/4 inch. Total thickness is usually 1–1.5 inches.

Is lime render better than cement?

Lime is more breathable and traditional but slower to cure. Cement is faster and stronger. Use lime on heritage; cement on modern.

Do I need to prep the surface?

Yes, remove old render, seal cracks, and dampen the surface before applying new render. Labor for prep is significant.

TOTAL

J$0.00

Render type

Room — enter the room size and wall height. All four walls are counted.

Room length
ft
in
Room width
ft
in
Wall height
ft
in

Wall — enter the length and height of the face to render.

Wall length
ft
in
Wall height
ft
in
Running feet
ft
in

Output

Gross area0.0 sq ft
Net area0.0 sq ft / 0.0 sq yd
Cement (1:4 mix)0 bags · J$0.00
Sand0.00 cu yd · J$0.00
Render labour (0.0 sq yd)J$0.00
MaterialsJ$0.00
LabourJ$0.00
SubtotalJ$0.00
GCTJ$0.00