⬜

Concrete Slab

Volume, rebar & materials

concrete slab calculator Jamaica

Estimate the cost of concrete floor slabs, including site mix or ready-mix concrete, rebar reinforcement, finishing, and labour for residential and commercial applications.

  1. 1Enter slab dimensions (length × width)
  2. 2Specify thickness (typically 4–6 inches)
  3. 3Choose concrete mix (ready-mix vs. site-mix)
  4. 4Add rebar, finishing, and labor

Frequently Asked Questions

What thickness should my slab be?

Residential floors are typically 4 inches; garages and driveways 4–6 inches; industrial floors 6–8 inches or more. Check structural requirements.

Can I use site-mix concrete in Jamaica?

Yes, site-mix (on-site mixing) is common and costs less than ready-mix. However, ready-mix provides better quality control.

Do I need a vapor barrier?

A vapor barrier (polyethylene) is recommended under slabs to prevent moisture. Add cost for 6-mil plastic and labor to install.

Stage 3

Structural Frame

TOTAL

J$0.00

Slab type

Length
ft
in
Width
ft
in

Overrides Length × Width for volume & materials — rebar and formwork still need Length × Width

Thickness & waste

Thickness

Tap a preset above or type any thickness — 4½" and 7" slabs are fine

Rebar mat

Formwork

Edge forms run round the perimeter of each slab — no interior grid or decking needed for a slab poured on the ground.

Edge form stock length

Mix grade

Enter length and width to see results.