Volume, rebar & materials
Estimate the cost of concrete floor slabs, including site mix or ready-mix concrete, rebar reinforcement, finishing, and labour for residential and commercial applications.
Residential floors are typically 4 inches; garages and driveways 4–6 inches; industrial floors 6–8 inches or more. Check structural requirements.
Yes, site-mix (on-site mixing) is common and costs less than ready-mix. However, ready-mix provides better quality control.
A vapor barrier (polyethylene) is recommended under slabs to prevent moisture. Add cost for 6-mil plastic and labor to install.
TOTAL
J$0.00
Slab type
Overrides Length × Width for volume & materials — rebar and formwork still need Length × Width
Thickness
Tap a preset above or type any thickness — 4½" and 7" slabs are fine
Edge forms run round the perimeter of each slab — no interior grid or decking needed for a slab poured on the ground.
Edge form stock length
Enter length and width to see results.